Natural Resources
Conservation Service
Ecological site F006XY701OR
East Crater Lake Pumice Buttes
Accessed: 11/21/2024
General information
Provisional. A provisional ecological site description has undergone quality control and quality assurance review. It contains a working state and transition model and enough information to identify the ecological site.
Figure 1. Mapped extent
Areas shown in blue indicate the maximum mapped extent of this ecological site. Other ecological sites likely occur within the highlighted areas. It is also possible for this ecological site to occur outside of highlighted areas if detailed soil survey has not been completed or recently updated.
Table 1. Dominant plant species
Tree |
(1) Pinus ponderosa |
---|---|
Shrub |
(1) Arctostaphylos patula |
Herbaceous |
(1) Carex inops |
Physiographic features
The site is on moderately sloping to steep south facing slopes of volcanic buttes.
Table 2. Representative physiographic features
Landforms |
(1)
Ash flow
(2) Butte |
---|---|
Flooding frequency | None |
Ponding frequency | None |
Elevation | 1,219 – 1,981 m |
Slope | 0 – 70% |
Water table depth | 152 cm |
Aspect | SE, S |
Climatic features
Precipitaion comes as snow from November - March and as rain from April - May. Summers are generally dry, except for thunderstorms that can provide rain. Winters are cold and snowy and summers are warm and dry.
Table 3. Representative climatic features
Frost-free period (average) | 70 days |
---|---|
Freeze-free period (average) | 107 days |
Precipitation total (average) | 762 mm |
Figure 2. Monthly precipitation range
Figure 3. Monthly average minimum and maximum temperature
Influencing water features
None
Soil features
This site is found on steep south facing slopes of volcanic buttes with soils that formed in volcanic pumice and ash airfall and andesite lava deposits. It is also found on volcanic ash flow deposits on lava table lands.
Table 4. Representative soil features
Surface texture |
(1) Paragravelly loamy sand (2) Very gravelly loamy sand (3) Ashy loamy sand |
---|---|
Family particle size |
(1) Sandy |
Drainage class | Somewhat excessively drained to excessively drained |
Permeability class | Rapid to very rapid |
Soil depth | 152 cm |
Surface fragment cover <=3" | 10 – 50% |
Surface fragment cover >3" | 0 – 20% |
Available water capacity (0-101.6cm) |
8.13 – 18.03 cm |
Calcium carbonate equivalent (0-101.6cm) |
0% |
Electrical conductivity (0-101.6cm) |
0 mmhos/cm |
Sodium adsorption ratio (0-101.6cm) |
0 |
Soil reaction (1:1 water) (0-101.6cm) |
6.1 – 7.3 |
Subsurface fragment volume <=3" (Depth not specified) |
15 – 50% |
Subsurface fragment volume >3" (Depth not specified) |
0 – 25% |
Ecological dynamics
Ponderosa pine is the predominant climax tree specie found in the overstory in this ecological site. Lodgepole pine may also be in the overstory.
Fire is the major disturbance factor in this site. Fire return intervals ranging from approximately 10 to 40 years has been documented in the general area where this site occurs. This return interval benefits pine by keeping shade tolerant species from getting established and growing.
The more frequent fires areas had a grass dominated understory and where fire returns were longest shrubs were a large component of the understory.
When a large stand replacement fire occurred it consumed all trees. After such a fire Lodgepole pine generally established on the site. Lodgepole's stocking density could vary from light to very heavy. Where stocking was heavy to very heavy the stand would eventually become susceptible to mountain pine bettle infestations or wild fire. A beetle outbreak would practically kill all the pine. By this time if Ponderosa pine seedlings have established they are released to grow.
When fire is excluded shade tolerant species increase. Here, Shasta red fir is the main specie and occasionally white fir. Either of these species were present in the HCPC, but as a very small component. They maintained their existence by growing in rock outcrops where fire burned infrequently or fire intensity was low.
State and transition model
More interactive model formats are also available.
View Interactive Models
More interactive model formats are also available.
View Interactive Models
Click on state and transition labels to scroll to the respective text
Ecosystem states
State 1 submodel, plant communities
State 2 submodel, plant communities
State 1
Ponderosa pine plant community
Community 1.1
Ponderosa pine plant community
The historic climax plant community has Ponderosa pine as the dominant tree specie. Lodgepole pine is occasionally present and S. red fir may be present, but only where fire has not occurred for a signinficant time frame. The understory vegetation is dominated by greenleaf manzanita, antelope bitterbrush, longstolon sedge, western needlegrass. S. red fir would be found in the overstory at the higher elevations of the site. It would have been found mostly in the rock outcrops where fire burned infrequently or as severe. It would make up a small component of the over all ecological site.
Forest overstory. The typical forest overstory composition of the historic climax plant community.
Forest understory. The typical annual production of the understory species to a height of 4.5 feet (excluding boles of trees) under low, high, and representative canopy covers.
Plant composition is expressed as "percent canopy cover". Species listed as "0" percent are present at less than 1 percent canopy cover.
Table 5. Ground cover
Tree foliar cover | 20-30% |
---|---|
Shrub/vine/liana foliar cover | 35-40% |
Grass/grasslike foliar cover | 20-25% |
Forb foliar cover | 0% |
Non-vascular plants | 0% |
Biological crusts | 0% |
Litter | 20-30% |
Surface fragments >0.25" and <=3" | 0-5% |
Surface fragments >3" | 0% |
Bedrock | 0% |
Water | 0% |
Bare ground | 5-10% |
Table 6. Soil surface cover
Tree basal cover | 0% |
---|---|
Shrub/vine/liana basal cover | 0-3% |
Grass/grasslike basal cover | 5-8% |
Forb basal cover | 0% |
Non-vascular plants | 0% |
Biological crusts | 0% |
Litter | 40-50% |
Surface fragments >0.25" and <=3" | 10-15% |
Surface fragments >3" | 1-3% |
Bedrock | 0% |
Water | 0% |
Bare ground | 5-15% |
Table 7. Canopy structure (% cover)
Height Above Ground (m) | Tree | Shrub/Vine | Grass/ Grasslike |
Forb |
---|---|---|---|---|
<0.15 | – | – | 5-10% | – |
>0.15 <= 0.3 | – | – | 15-20% | – |
>0.3 <= 0.6 | – | 2-5% | – | – |
>0.6 <= 1.4 | – | 20-25% | – | – |
>1.4 <= 4 | – | – | – | – |
>4 <= 12 | 1-5% | – | – | – |
>12 <= 24 | 20-25% | – | – | – |
>24 <= 37 | 2-5% | – | – | – |
>37 | – | – | – | – |
State 2
Lodgepole pine community
Community 2.1
Lodgepole pine community
To have this plant community a stand replacement fire has removed the historic climax community. Lodgepole pine is either pure or a small amount of Ponderosa pine is in the stand. Over time ponderosa will re-establish and eventually take over the stand. Lodgepole pine stocking density can be from light to very heavy. Stands that are heavy to very heavy stocking are susceptible to mountain pine beetle outbreaks. This occurs as the trees start to reach their early maturity stage. The trees become stressed and are easily attacked and killed by the beetle.
Forest overstory. The typical forest overstory composition of the lodgepole pine plant community.
Forest understory. The typical annual production of the understory species to a height of 4.5 feet (excluding boles of trees) under low, high, and representative canopy covers.
Plant composition is expressed as "percent canopy cover". Species listed as "0" percent are present at less than 1 percent canopy cover.
Table 8. Ground cover
Tree foliar cover | 20-30% |
---|---|
Shrub/vine/liana foliar cover | 10-15% |
Grass/grasslike foliar cover | 20-25% |
Forb foliar cover | 0-1% |
Non-vascular plants | 0% |
Biological crusts | 0% |
Litter | 20-30% |
Surface fragments >0.25" and <=3" | 1-5% |
Surface fragments >3" | 0% |
Bedrock | 0% |
Water | 0% |
Bare ground | 10-15% |
Table 9. Soil surface cover
Tree basal cover | 0% |
---|---|
Shrub/vine/liana basal cover | 1-5% |
Grass/grasslike basal cover | 3-8% |
Forb basal cover | 0-1% |
Non-vascular plants | 0% |
Biological crusts | 0% |
Litter | 40-50% |
Surface fragments >0.25" and <=3" | 1-5% |
Surface fragments >3" | 0% |
Bedrock | 0% |
Water | 0% |
Bare ground | 8-15% |
Table 10. Canopy structure (% cover)
Height Above Ground (m) | Tree | Shrub/Vine | Grass/ Grasslike |
Forb |
---|---|---|---|---|
<0.15 | – | – | – | 0-1% |
>0.15 <= 0.3 | – | 0-1% | 15-20% | – |
>0.3 <= 0.6 | – | 2-5% | 3-8% | – |
>0.6 <= 1.4 | – | 5-8% | – | – |
>1.4 <= 4 | 0-2% | – | – | – |
>4 <= 12 | 2-5% | – | – | – |
>12 <= 24 | 25-30% | – | – | – |
>24 <= 37 | – | – | – | – |
>37 | – | – | – | – |
Additional community tables
Interpretations
Recreational uses
Hiking, Backpacking, bird watching
Wood products
Sawlogs, Post/poles, Firewood
Other products
Mushrooms
Supporting information
Contributors
C Ziegler
Rangeland health reference sheet
Interpreting Indicators of Rangeland Health is a qualitative assessment protocol used to determine ecosystem condition based on benchmark characteristics described in the Reference Sheet. A suite of 17 (or more) indicators are typically considered in an assessment. The ecological site(s) representative of an assessment location must be known prior to applying the protocol and must be verified based on soils and climate. Current plant community cannot be used to identify the ecological site.
Author(s)/participant(s) | |
---|---|
Contact for lead author | |
Date | |
Approved by | |
Approval date | |
Composition (Indicators 10 and 12) based on | Annual Production |
Indicators
-
Number and extent of rills:
-
Presence of water flow patterns:
-
Number and height of erosional pedestals or terracettes:
-
Bare ground from Ecological Site Description or other studies (rock, litter, lichen, moss, plant canopy are not bare ground):
-
Number of gullies and erosion associated with gullies:
-
Extent of wind scoured, blowouts and/or depositional areas:
-
Amount of litter movement (describe size and distance expected to travel):
-
Soil surface (top few mm) resistance to erosion (stability values are averages - most sites will show a range of values):
-
Soil surface structure and SOM content (include type of structure and A-horizon color and thickness):
-
Effect of community phase composition (relative proportion of different functional groups) and spatial distribution on infiltration and runoff:
-
Presence and thickness of compaction layer (usually none; describe soil profile features which may be mistaken for compaction on this site):
-
Functional/Structural Groups (list in order of descending dominance by above-ground annual-production or live foliar cover using symbols: >>, >, = to indicate much greater than, greater than, and equal to):
Dominant:
Sub-dominant:
Other:
Additional:
-
Amount of plant mortality and decadence (include which functional groups are expected to show mortality or decadence):
-
Average percent litter cover (%) and depth ( in):
-
Expected annual annual-production (this is TOTAL above-ground annual-production, not just forage annual-production):
-
Potential invasive (including noxious) species (native and non-native). List species which BOTH characterize degraded states and have the potential to become a dominant or co-dominant species on the ecological site if their future establishment and growth is not actively controlled by management interventions. Species that become dominant for only one to several years (e.g., short-term response to drought or wildfire) are not invasive plants. Note that unlike other indicators, we are describing what is NOT expected in the reference state for the ecological site:
-
Perennial plant reproductive capability:
Print Options
Sections
Font
Other
The Ecosystem Dynamics Interpretive Tool is an information system framework developed by the USDA-ARS Jornada Experimental Range, USDA Natural Resources Conservation Service, and New Mexico State University.
Click on box and path labels to scroll to the respective text.